I started fitting the fiberglass intake snorkel and find that when connected to the front of the servo the rectangular upper portion that meets the baffle is about 3/4" too far to port.
I don't see any way to get the snorkel to move to starboard this amount without cutting a 3/4" section out of the center and epoxying it back together.
Is this what others have done to get this to fit? Seems drastic, but.....
I don't see any way to get the snorkel to move to starboard this amount without cutting a 3/4" section out of the center and epoxying it back together.
Is this what others have done to get this to fit? Seems drastic, but.....