papamike
Well Known Member
Hey everybody. I read an older post from 2-3 years ago where somebody had a perfect windshield bow. Mine is very nearly so, but I want to make sure...
Is it OK to have a very slight preload pulling the frame into position to mount it? Not sure it's worth the work to bend it for the small amount of adjustment that may be needed.
I also have a little bit of "toe-in" on the left side. Does that support brace have to be parallel, or can I get away with that difference as long as the position is correct and the bar is square?
Thanks
Is it OK to have a very slight preload pulling the frame into position to mount it? Not sure it's worth the work to bend it for the small amount of adjustment that may be needed.
I also have a little bit of "toe-in" on the left side. Does that support brace have to be parallel, or can I get away with that difference as long as the position is correct and the bar is square?
Thanks