flydjd
Well Known Member
Hi all,
Re Dwg 24 for the Slider and the bends in the 3 sub panels i.e. F-7105A and F-7105B L & R.
Where is the detail for measurements to bend these to fit F-721A L & R and the F-902 bulkheads i.e. horizontal distance from bottom and bend angle .... OR are you expected to just eyeball it
Thanks
Re Dwg 24 for the Slider and the bends in the 3 sub panels i.e. F-7105A and F-7105B L & R.
Where is the detail for measurements to bend these to fit F-721A L & R and the F-902 bulkheads i.e. horizontal distance from bottom and bend angle .... OR are you expected to just eyeball it
Thanks