nippaero
Well Known Member
I have another question about my new PM8000BT harness that was made by AS. I am building the ends and connecting a couple SL40's. I have a question about how to wire the PTT back to the SL40's. I'm hoping someone can help me understand.
Setup:
BT8000BT
SL40 (Com1)
SL40 (Com2)
Pilot and CoPilot PTT switch on Mic Jack
The PTT wires (Yellow) are wired to the pilot/copilot Mic jack as shown in the PM8000BT manual. This makes sense to me. I would connect this to my PTT switch.
My question is how do I connect the PTT back from the PM8000BT to the SL40 radios? So only the active radio would transmit?
Setup:
BT8000BT
SL40 (Com1)
SL40 (Com2)
Pilot and CoPilot PTT switch on Mic Jack
The PTT wires (Yellow) are wired to the pilot/copilot Mic jack as shown in the PM8000BT manual. This makes sense to me. I would connect this to my PTT switch.
My question is how do I connect the PTT back from the PM8000BT to the SL40 radios? So only the active radio would transmit?