[Paul Austin]

HI All
Just strating to run some sensor wires for my dynon skyveiw can anyone tell me if the MAP and TACH output on the lightspeed are compatible with the skyveiw system.
THanks

 

[Lionclaw]

I know the tach is, but I can't say for certain on the MAP. There didn't seem to be any good reason not to use the dynon MAP sensor, so I installed that with a 1/4x1/4x1/8 tee from McMaster. Pins 34/35 on the EMS' D37 are for L/R low voltage tach inputs. I posted a question on this in the dynon skyview support forum last week and got some good responses.