LettersFromFlyoverCountry
Well Known Member
I was over at fellow builder's hangar today and I really liked the floor cover he has on his 7. He apparently riveted put pieces of angle w/ a nutplate at various points on the angles that run from the main spar carry-through to the firewall. Then took a sheet of .040 and screwed it down into those pieces of angles. With soundproofing between.
I liked it, though I think my center cover screws down with screws horizontally through those angles that run from the spar to the firewall and I'd lose access there (without pulling up the floor covers).
Would love to see what others do here.
I liked it, though I think my center cover screws down with screws horizontally through those angles that run from the spar to the firewall and I'd lose access there (without pulling up the floor covers).
Would love to see what others do here.