Amadeus
Well Known Member
My paint work was done two years ago with Sherwin Williams general aviation paint by a shop that has since changed ownership (new ownership has no interest in answering any questions). At the time of the paint work I was given a small can of base topcoat for doing my own touch ups. I now have a couple nicks in the paint that I want to touch up but cannot get an answer on which components to add to base (hardener? activator?) and the mix ratio for these components.
Anyone know what I need to do to mix a very small amount to be dabbed into the very small nick spots? For very small spots do I even need to mix anything into the base topcoat or can I use a small artist brush and just put some of the base paint on the nick spots?
Also, once the paint is dry should I apply something like clear fingernail polish over the spots?
Jayson
Anyone know what I need to do to mix a very small amount to be dabbed into the very small nick spots? For very small spots do I even need to mix anything into the base topcoat or can I use a small artist brush and just put some of the base paint on the nick spots?
Also, once the paint is dry should I apply something like clear fingernail polish over the spots?
Jayson