[dweyant]

here is probably a dumb question...

I just got my panel powered up and I"m working on configuring things with the G3X.

I need to set green/yellow and red ranges for everything from amperage to manifold pressure to oil temp, etc.

How do I find the recommended values for all of these?

Thanks,

-Dan

 

[TCONROY]

Your engine manual should have most of that data. I've got a IO-360-M1B from Van's and the included Lycoming manual had all the parameters and limitations.

The alternator manual will have duty cycle limits for amperage

 

[MarkW]

Dan,
Here is what I started with. Not sure it is what I have them set at now.
Van's has a pdf on their site that shows the ASI colored arc settings for the RV-9.
** Please use this with caution and only after you have verified each number.

 

[az_gila]

Here is an old thread for the engine stuff -

http://www.vansairforce.com/community/showthread.php?t=23130

 

[dweyant]

Thanks for the help.

That got me some good starting points for some of the numbers.

-Dan