P plumbflyer Member Feb 6, 2009 #1 I was wondering what is the best plugs to use for the wiring on the servo motors and where to get them. It seems like it would be better to have a plug in to be able to remove the motor if it has problems.
I was wondering what is the best plugs to use for the wiring on the servo motors and where to get them. It seems like it would be better to have a plug in to be able to remove the motor if it has problems.
Rene Bubberman Well Known Member Feb 6, 2009 #2 D-sub pins and sockets We used D-sub crimped pins and sockets from SteinAir http://www.steinair.com/connectors.htm because of the small space and ditto wires. More pics on http://websites.expercraft.com/PHVII/index.php?q=log_entry&log_id=11115 These pins normally go inside a D-sub connector but can also be used individually with some heatshrink insulation. Don't forget to buy a good crimping tool.
D-sub pins and sockets We used D-sub crimped pins and sockets from SteinAir http://www.steinair.com/connectors.htm because of the small space and ditto wires. More pics on http://websites.expercraft.com/PHVII/index.php?q=log_entry&log_id=11115 These pins normally go inside a D-sub connector but can also be used individually with some heatshrink insulation. Don't forget to buy a good crimping tool.
A allbee Well Known Member Feb 6, 2009 #4 solder direct and use heat shrink. cheaper , no corrosion, no connection problem
