Hello,
I am looking for some feedback on properly securing wiring from the wing conduit.
Here is an example of how I secured the stall warning wiring:
I am having trouble finding some solid examples based on acceptable practices and did not find any guidance from VANs.
I cut a slot in the conduit and protected the wire at the slot with heat shrink and routed it as you see with tie-wraps.
Does this look acceptable? Any suggestions?
Thanks.
I am looking for some feedback on properly securing wiring from the wing conduit.
Here is an example of how I secured the stall warning wiring:
![1pgwwm.jpg](/community/proxy.php?image=http%3A%2F%2Fi60.tinypic.com%2F1pgwwm.jpg&hash=b53f399ee202b71d8d2de44b10f05400)
I am having trouble finding some solid examples based on acceptable practices and did not find any guidance from VANs.
I cut a slot in the conduit and protected the wire at the slot with heat shrink and routed it as you see with tie-wraps.
Does this look acceptable? Any suggestions?
Thanks.