acam37
Well Known Member
I did a search on safety wiring turnbuckles and have found very little useful info on the subject. I need to safety the turnbuckles on my rudder cables and would like to see how it's properly done.
Mine has a hole in the barrel and on the cable end, but not on the tie rod end. There is a slot/groove around the outside of the tie rod so I assume it's for the wire. All I really need is a good picture for reference.
Mine has a hole in the barrel and on the cable end, but not on the tie rod end. There is a slot/groove around the outside of the tie rod so I assume it's for the wire. All I really need is a good picture for reference.