[Fearless]

I asked Vans for a parts list for a FP Slider Finishing Kit for a 9A which they provided. I found the section in this site which had the hardware breakdown for the bags in the finishing kit from 2003. I couldn't find what the components should be in Bag 933 and Bag 945 which are listed in the current finishing kit list that I received from Vans.

Bag 933's description is All 'A' Model Hardware

Bag 945's description is Added Spinner Hardware

Could someone provide the part numbers and quantities that are in those bags?

Thanks

 

[Chickenlips]

BAG 933 ALL 'A' MODEL HDWRE
8 AN507C632R8 SCREW,FLT HD SS
8 AN507C832R8 SCREW,FLT HD SS
4 AN960-616 WASHER 3/8
4 AN960-616L WASHER (032) 3/8
8 K1000-08 PLATENUT 8-32
2 WASHER 062 257830 HARDENED GR. 8 WASHER


BAG 945 ADDED SPINNER HWDRE
24 WASHER 5610-18-31 NYLON WASHER #8 SCREW
24 AN526C832R8 SCREW,TRUSS HD SS
0.01 AN426AD4-5 RIVETS (LB)

 

[Fearless]

What I determined

Thanks for the reply Chickenlips.

I added up all the components on the list and determined that we get about a 5% break on the price with the whole kit at current prices on the 'list'. As some people on the site may already know is that if you delete components you only get 75% credit for that/those components.

I already have the engine mount and nose strut and was wanting to find out what I might save if I deleted those components. When I order the kit I'll probably go ahead and get the all the components and hang on to my mount and strut as a spare.

Thanks

 

[Chickenlips]

Components purchased "in a kit" from Van's Aircraft are substantially discounted in cost. Items purchased "separately" from the kit would cost more so you are probably right, don't delete it from the kit if there is a chance you might want to buy it for later use!