so i am working through these nose ribs, skin, etc. trying to reduce the bumps i see from the ribs to the skin right on the leading egde. hopefully they aren't that bad when things get matched and dimpled, riveted.
anyway, i noticed on a couple of the 909L ribs, two in fact that are on the inboard end have a couple of holes in each that don't match up with the spar. i am assuming i just match drill from the spar side and then leave the rib side holes alone?
anyway, i noticed on a couple of the 909L ribs, two in fact that are on the inboard end have a couple of holes in each that don't match up with the spar. i am assuming i just match drill from the spar side and then leave the rib side holes alone?