UnPossible
Well Known Member
Hey - starting to think pretty seriously about the panel for my plane. After several hours of playing around on XPanel, I have come up with the lay out below. I'd love any critiques or suggestions to improve usability you may have.
Notes:
1) Panel is indended for VRF only
2) Engine is FI - no need for Carb Heat. (Black knobs are for Cabin heat and Alt air)
3) I'm plannning on using the Dynon Transponder, so no need for transponder panel space
4) I have an Andair throttle quadrant with the flap switches on the throttle lever.
5) If I have to add more switches beside those on the VP-50, the plan is to place them to the right of the Red Starter Button
6) I have a ICOM hand held... planning on adding an antenna input to the face of the panel to allow it to use the ship's antenna and function as a back up radio.
7) I have a Garmin GPS 296 hand held that will be in the fight bag as a back-up as well.
Thanks,
Jason
Notes:
1) Panel is indended for VRF only
2) Engine is FI - no need for Carb Heat. (Black knobs are for Cabin heat and Alt air)
3) I'm plannning on using the Dynon Transponder, so no need for transponder panel space
4) I have an Andair throttle quadrant with the flap switches on the throttle lever.
5) If I have to add more switches beside those on the VP-50, the plan is to place them to the right of the Red Starter Button
6) I have a ICOM hand held... planning on adding an antenna input to the face of the panel to allow it to use the ship's antenna and function as a back up radio.
7) I have a Garmin GPS 296 hand held that will be in the fight bag as a back-up as well.
Thanks,
Jason