As I am working alone I have been contemplating using blind rivets for the bottom wing skins as I do not see how I can install all the solid rivets by myself.
According to van's cs4-4 rivets will work fine and have a greater shear strength that the 3/32 solid rivets (I have the 120 degree dimple set for the cs4's).
I have also been researching cherrymax rivets which are more expensive but are better looking when installed (van's says these are overkill structurally)
Any opinions or suggestions
Thanks
According to van's cs4-4 rivets will work fine and have a greater shear strength that the 3/32 solid rivets (I have the 120 degree dimple set for the cs4's).
I have also been researching cherrymax rivets which are more expensive but are better looking when installed (van's says these are overkill structurally)
Any opinions or suggestions
Thanks