John Courte
Well Known Member
My setup is with the battery on the forward side of the firewall, the PC680 with contactors in standard Van's locations. I have a SafeAir1 firewall pass-through. My electrical plan calls for a 6AWG wire to the main bus and a 16AWG wire to the endurance bus. Both of these wires originate somewhere near or on the battery contactor (possible use of a shunt instead of the MGL current sensor), so with this in mind and the ship already on the gear, where would you put the 3/4" hole for the power pass-through?
Pictures of your installs would be greatly appreciated.
thanks,
John
Pictures of your installs would be greatly appreciated.
thanks,
John