We've just become the new owners of a very nice RV-6A. The builder used a simple detented type wire cable for the mixture which doesn't work very well. I'd like to replace it with a vernier-type mixture cable. The problem is that the mixture arm on the Precision Airmotive throttle body has a 1/4" hole and the mixture cable has a 10-32 threaded end. The only rod-end bearings I can find have 10-32 thread and a 3/16" bore.
How do I connect the mixture control cable to the mixture arm?
Thanks,
Adam Molny
N2041H
N181AM
How do I connect the mixture control cable to the mixture arm?
Thanks,
Adam Molny
N2041H
N181AM