[Bevan]

Can anyone with RV12 plans on hand tell me the part numbers of all the pieces to make the fill tube? see also picture attached.

Upper fuel fill flange
Lower flange attached to tank
45 degree alum tube
any misc clamps/attach hardware etc


would also like to know the approx. length of that 45 tube.

Thanks

Bevan

 

[John-G]

Bevan-

The upper flange is welded onto the filler neck with the 45 degree bend you mentioned. The part number for the parts top to bottom are the following:

Fuel Cap T-406A
Filler Neck T-1211
Fuel neck collar T-1212
Two hose clamps AN737TW-66
Tank Flange T-1204B

Misc hardware:
Six nutplates K1000-06
Six screws AN526C632R8
Twelve rivets AN426AD3-4

Not at the hangar so can't help with the measurement you are asking for. Hope this helps.

Happy building,

 

[Bevan]

Thanks John,

If anyone else can chime in, I would also like to know the outside diameter and overall approx length of the 45 tube.

Thank you very much.

Bevan