Geico266
Well Known Member
Here is the thread to post your modifications made to your compelted and inspected -12. This is AFTER you have recieved the airworthness inspection and flown your hours off in Phase 1. Obviously, we need to be carefull with any modicicatiosn made to any airplane so make sure they are completed using the "aircraft building skills" we learned by building the kits, and have an A&P or knowledgeable builder type inspect your idea and work when completed.
My first mod? In preparation for paint I decided to make covers for the stabilator. I think it cleaned up the ends real nice and gave them a finished look.
If someone would post a "before" picture I would apprciate it. I took one, but it did not turn out.
Other mods I am considering;
1. Coolant temp sensor (to conform with Rotax SB)
2. Fuel boost pump switch.
My first mod? In preparation for paint I decided to make covers for the stabilator. I think it cleaned up the ends real nice and gave them a finished look.
If someone would post a "before" picture I would apprciate it. I took one, but it did not turn out.
Other mods I am considering;
1. Coolant temp sensor (to conform with Rotax SB)
2. Fuel boost pump switch.
Last edited: