[Bob Kibby]

I ordered the materials from Aircraft Spruce but I am sure there are many other good sources out there so this is not an endorsement.

I also made one change to Pete's list. I doubled the Dacron Fabric from 1 to 2 yards. This is used as "peal ply" to get excess resin out of the fiberglass cloth.




PART# ORDERED
--------------------------------------------------------------------------------
01-14600 3M GLASS BUBBLES 1 LB. 1.00
01-14800 FLOCKED COTTON FIBER 1 LB. 1.00
01-00324 16 OZ MIXING CUP (PKG OF 25) 1.00
01-25800 MIXING STICKS BOX OF 500 1.00
09-00300 DACRON FAB 2.7OZ, 62 W #604 2.00
7781-60 FIBERGLASS CLOTH STAND 7781-60 2.00
01-08200 WEST SYSTEM EPOXY KIT A-2 SLOW 1.00

From Arlington where our weather has been great for flying,
Bob Kibby

 

[MartySantic]

Bob,

1 yard of Peel Ply is more than enough. With just 1 yard, you will have 80% left over. Call them and cancel, if not too late.