The instructions on 07-05 call for a LP4-5, which I set from the clip side. This little nub is all I had on the other side.
![9B51D016-3D97-4329-927B-48C66219CAA3.jpeg 9B51D016-3D97-4329-927B-48C66219CAA3.jpeg](https://vansairforce.net/data/attachments/13/13999-aed6b5c235ae4092d5e192b832cf266f.jpg)
Not happy, I drilled it out carefully and re-riveted from the other side. The shop side did not expand enough to secure the plastic, so I was able to pull off the clip by hand, no problem.
I drilled that one out carefully, and now I'm out of LP4-5 rivets. I don't think it was a good choice for this rivet anyway. What could I try instead?
![9B51D016-3D97-4329-927B-48C66219CAA3.jpeg 9B51D016-3D97-4329-927B-48C66219CAA3.jpeg](https://vansairforce.net/data/attachments/13/13999-aed6b5c235ae4092d5e192b832cf266f.jpg)
Not happy, I drilled it out carefully and re-riveted from the other side. The shop side did not expand enough to secure the plastic, so I was able to pull off the clip by hand, no problem.
I drilled that one out carefully, and now I'm out of LP4-5 rivets. I don't think it was a good choice for this rivet anyway. What could I try instead?