[lokobuff]

Riveters,

I'm not reading anywhere in the "riveting the rudder" section where it tells me to add the nutplates for the rudder, but it seems pretty logical to do that now... Am I wrong?

[/IMG]

[/IMG]

Thanks for advice,
Loko

 

[azonic75]

They are there, put them on last night. Make sure the rod end bearing bolts fit through the holes and seat in the platenuts. Once the skin is on you'll never get at them. Rivet the bottom one before you put on the rudder horn brace (710) Cheers

 

[lokobuff]

Awesome, thanks.

 

[Don Patrick]

Here is a shot of how mine look....you rivet the nutplates on at the same time as the reinforcement plate after enlarging the hole.

http://www.mykitlog.com/users/display_log.php?user=Don Patrick&project=820&category=5795&log=105700&row=3
Becareful with the rudder horn if you haven't read up on it yet...if you follow the plans, you will lose your MED when you cut it....

Cheers,