Bruce Well Known Member Friend Feb 21, 2007 #1 Are the rudder pedals prepunched and what is the thickness of the pedals. Thinking about making custom polished pedals. Tail number instead of holes. Thanks,
Are the rudder pedals prepunched and what is the thickness of the pedals. Thinking about making custom polished pedals. Tail number instead of holes. Thanks,
Gsuit Well Known Member Feb 21, 2007 #2 Bruce, If you're referring to the actual pedals and the many lightening holes in them, then YES - they are pre-punched. The "frame" of angle and the attach point for the pivot is not.
Bruce, If you're referring to the actual pedals and the many lightening holes in them, then YES - they are pre-punched. The "frame" of angle and the attach point for the pivot is not.
captainron Well Known Member Feb 21, 2007 #3 Bruce said: Are the rudder pedals prepunched and what is the thickness of the pedals. Thinking about making custom polished pedals. Tail number instead of holes. Thanks, Click to expand... Pedal thickness=.125"
Bruce said: Are the rudder pedals prepunched and what is the thickness of the pedals. Thinking about making custom polished pedals. Tail number instead of holes. Thanks, Click to expand... Pedal thickness=.125"
Bruce Well Known Member Friend Feb 21, 2007 #4 Thanks guys. I will post when I get to it. Now I need to find a place to get .125 at a cheap rate.
T tysonb Member Feb 22, 2007 #5 Check Online Metals. Their prices aren't too bad and there isn't usually a cut charge.
D ddurakovich Well Known Member Feb 22, 2007 #6 You might also try www.metalexpress.com They have a location at: 5532 Midway Road Suite 4 Haltom City, TX 76117 Phone: 1-817-834-7775 that usually carries aluminum, and generally pretty competitive.
You might also try www.metalexpress.com They have a location at: 5532 Midway Road Suite 4 Haltom City, TX 76117 Phone: 1-817-834-7775 that usually carries aluminum, and generally pretty competitive.
