AJ85WA
Well Known Member
Hi Guys
Im in the process of rigging up the rudder cable to the pedal via the link.
When it is all attached and in position the hole in the side of the bulkhead with the snap bushing is not lined up with the pedal mounting location causing the cable to rub on the inside of the snap bushing. the entire pedal really needs to be like 1/2 inch closer to the side of fuselage.(But if i did cut it to do so the other end would probably fall out of the plastic housing.
I have triple checked all my measurements of the pedal assembly to the drawings and they are all good, also the hole in the plastic housings are to the correct depth?
Is there anything im missing here?
Thanks AJ
Im in the process of rigging up the rudder cable to the pedal via the link.
When it is all attached and in position the hole in the side of the bulkhead with the snap bushing is not lined up with the pedal mounting location causing the cable to rub on the inside of the snap bushing. the entire pedal really needs to be like 1/2 inch closer to the side of fuselage.(But if i did cut it to do so the other end would probably fall out of the plastic housing.
I have triple checked all my measurements of the pedal assembly to the drawings and they are all good, also the hole in the plastic housings are to the correct depth?
Is there anything im missing here?
Thanks AJ