[Bwing96]

There are some plastic pieces that the rudder cable runs trough where it comes out of the side of the plane and they are all but worn into on my -6.
Can these pieces be pulled out and rotated so the cable doesn't rub the skin covering the fuselage?

 

[JonJay]

It's probably simple tubing slit open so it can slide over the cable. Easy to replace.

 

[jlfernan]

It should be held in place with an Adel clamp. If you could reach inside and loosen it, you can turn the tubing.

 

[Bwing96]

Guides

Thank You for the info.
Looks like I need to go in there anyway, I'm wanting to change the tailwheel fork and will need to remove the spring to have it machined.
My tailwheel spring makes a 90* bend downward.