[mikehoover]

How in blue blazes do you get the nut on the bolt of the aft 1/4 bolt thru the roll bar into the aft canopy deck? I keep thinking I need to scallop the bottom flange here but never a mention in the manual or plans that I have seen. Any suggestions?

Thanks!

 

[scard]

I don't remember having any problems there. My experience here. Sorry.

 

[mikehoover]

Slider

Oops! Should have mentioned I building the slider.

 

[scard]

<chuckle> no wonder I was confused . But thanks for the empennage fairing experience, mine are now done without any pain (thanks to your heads up).

 

[N916K]

How in blue blazes do you get the nut on the bolt of the aft 1/4 bolt thru the roll bar into the aft canopy deck? I keep thinking I need to scallop the bottom flange here but never a mention in the manual or plans that I have seen. Any suggestions?

Thanks!

I made a nut holder out of sheet aluminum. With a little work you should be able to make a tool that holds the nut while you turn the bolt. No need to cut the flange back.

 

[Jeff Vaughan]

Nut Help

I super glued the washer and nut to the spacer. Worked great!

Jeff Vaughan

 

[mikehoover]

It is possible!

Thanks for the suggestions! I finally got the thing bolted on!