[ExtraKatana]

Does anyone know if the Now out of business Rocky Mountain EMS probes are compatible with other EMS? I will need a new display but would like to keep using the probes as they appear to still be in good working condition.

 

[RV6_flyer]

A number of years ago, I replaced my Rocky Mountain Instruments microMonitor with a Dynon unit. I found it easier to just replace all the probes than try to rework wiring to work with the new unit. I did reuse the fuel flow transducer.

The Dynon pressure transducers supplied in their kit were a very big improvement over the VDO transducers that were used on the RMI engine monitor.

 

[vlittle]

EGT and CHT probes are 100% compatible.

 

[ExtraKatana]

I assume you mean with Dynon Vern?