I have just started to rivet VS (first riveting experience). I am using the Avery rivet squeezer with 1/8 set for AN470 rivets. When I set the rivet the die leaves a slight "halo" around the base of the manufactered head. I have tried the modified set and I have tried the hand squeezers and all the rivets are left with this "slight" marking. Is this normal? It seems strange that both the normal and modified set leave the same mark. Any advice would be appreciated as I don't want to do any more rivets until this is sorted out.
Perhaps this is common with Avery rivet sets?
Perhaps this is common with Avery rivet sets?