[RV8Squaz]

Just in case anyone is looking for them. See page 3 for RG-400. Best to use a tool specifically designed for stripping RG-400, but I haven?t always had luck with them as they often fall out of adjustment. The razor blade always works.

https://www.alliedelec.com/m/d/4aa03ec12bf308777818ea6f15d8237e.pdf

 

[skyking902001]

I used this stripper for coax. Once the blades are properly adjusted, it works perfectly every time.


https://www.amazon.com/Paladin-Tools/b/ref=w_bl_hsx_s_hi_web_2530086011?ie=UTF8&node=2530086011&field-lbr_brands_browse-bin=Paladin+Tools

 

[9GT]

I tried a stripper that sometimes worked properly, but more often did not. It was a cheap unit so I threw it out and reverted back to doing it with a razor blade also. Steinair has a good video on page 2 for RG400 cable stripping and BNC connector crimping.
https://www.steinair.com/documents-and-support/videos/

 

[Raymo]

The one I found at ACS works well too (once properly adjusted).

IDEAL COAX STRIPPER