scard Well Known Member Advertiser Apr 11, 2007 #1 Should we be removing the paint on the brake disks before break-in to keep from grinding it into the pads?
Should we be removing the paint on the brake disks before break-in to keep from grinding it into the pads?
AlexPeterson Well Known Member Apr 11, 2007 #2 It comes right off with lacquer thinner, might even come off with acetone. Many leave it on, but why not remove it from where the pads rub? Takes about 5 minutes.
It comes right off with lacquer thinner, might even come off with acetone. Many leave it on, but why not remove it from where the pads rub? Takes about 5 minutes.
osxuser Well Known Member Apr 12, 2007 #3 Yep, easiest with mek soaked into a bit of fine scotchbrite. One scrape with that, let it sit 5 min and then wipe it off.
Yep, easiest with mek soaked into a bit of fine scotchbrite. One scrape with that, let it sit 5 min and then wipe it off.