rph142
Well Known Member
Hit another speed bump tonight. Just incase anyone is wondering, the RV-3 FWF is really tight...I mean REALLY tight. My purge valve control arm is hitting the top cowl at about half stroke. My two options are to remote mount the valve or to rotate the valve so the control arm is pointed down into the engine. I am wondering if it would be possible to mount the valve on the rear baffle or firewall, roughly 6" - 15" away from the flow divider (spider?). Has anyone had to remote mount the purge valve? Im guessing this is only an issue on RV-3's and 4's.
Thanks,
Rob
Thanks,
Rob