Howdy folks-
Got a wing situation here.
Can some body tell me what page of the plans the rear spar edge trimming is on? I'm working off an early set of plans if that makes any difference. The rear spar doesn't go in far enough to allow the main spar bolts to align. Looks like I need about another 1/2 inch or so off the rear. It's hitting the spacer bar just inside the fuse. I found a drawing on some ones web page with the trim dimensions on it but Be danged if I can find it on my plans. What would be a really big help would be knowing the trimmed length of the spar tab maybe from the last row of rivets to the edge. I think what may have happened here is a brain fart of moderate proportions and I just didn't trim it at the time. I can whack that sucker off a little bit but would like to hear what the class has to say first. It's a real bugger adding it back after you removed it.
Thanks gang - rvcooper
Got a wing situation here.
Can some body tell me what page of the plans the rear spar edge trimming is on? I'm working off an early set of plans if that makes any difference. The rear spar doesn't go in far enough to allow the main spar bolts to align. Looks like I need about another 1/2 inch or so off the rear. It's hitting the spacer bar just inside the fuse. I found a drawing on some ones web page with the trim dimensions on it but Be danged if I can find it on my plans. What would be a really big help would be knowing the trimmed length of the spar tab maybe from the last row of rivets to the edge. I think what may have happened here is a brain fart of moderate proportions and I just didn't trim it at the time. I can whack that sucker off a little bit but would like to hear what the class has to say first. It's a real bugger adding it back after you removed it.
Thanks gang - rvcooper