Question for the builders of the older -8 kits (I've looked at build sites, and it seems the newer kits are different). Mine's a QB from before they were prepunched.
On the plans, it shows a rivet through the F833B and the hinge, F833D (circled in blue pencil:
Drilling these together with the parts in proper position will yield no edge distance for the hole through the hinge - in fact, it probably will go through the edge: (picture just shows hinge position relative to the prepunched hole in F833B, hinge would be under the seat back skin and aligned with the left edge in the picture)
How did you guys assemble this?
On the plans, it shows a rivet through the F833B and the hinge, F833D (circled in blue pencil:
Drilling these together with the parts in proper position will yield no edge distance for the hole through the hinge - in fact, it probably will go through the edge: (picture just shows hinge position relative to the prepunched hole in F833B, hinge would be under the seat back skin and aligned with the left edge in the picture)
How did you guys assemble this?
Last edited: