[rv8or]

Need Advice

There is a drawing conflict between Drawing 31 section AA where the battery cable runs through the spar web. on this drawing it shows it above the aileron push rod yet on drawing OP11 Wiring Harness Instalation it shows the battery cable penetration below the push rod. It also looks like this lower hole could interfere with the aileron push rod.
Where have previous builders penetrated the spar web for the battery cable.
A picture would be great.

Thanks
Rob
A very very slow build RV8

 

[drill_and_buck]

Hi Rob,

I recall having the same concern as you when installing my battery cable.

I used the location per OP-11 drawing for my battery cable.and used a series of adel clamps to ensure that the cable remained close to the fuse floor and below the aileron push rod.

Mike

 

[scsmith]

I went under

Just exactly as drill_and_buck said.