fstringham7a
Well Known Member
REynon/EZ/Garmin Panel
Thought I would share with the group a pix of my panel in it's lates stage of development. Empty trays for Dynon EFIS/EMS, Garmin centric nav/com/EZ Pilot and Altitude hold. Back end will be wired up with Fast Stack Hub and wiring harness. I am also using Aeroelectric Z13/8 wiring architecture. Making the big cut and sizing just right was a one week process. Jig saw rough cut then file-check.....file-check....file-check...you get the idea. I spent today determining switch locations/drilling/and mounting switches.
[ Frank @ sgu RV7A "NDY"
Thought I would share with the group a pix of my panel in it's lates stage of development. Empty trays for Dynon EFIS/EMS, Garmin centric nav/com/EZ Pilot and Altitude hold. Back end will be wired up with Fast Stack Hub and wiring harness. I am also using Aeroelectric Z13/8 wiring architecture. Making the big cut and sizing just right was a one week process. Jig saw rough cut then file-check.....file-check....file-check...you get the idea. I spent today determining switch locations/drilling/and mounting switches.
[ Frank @ sgu RV7A "NDY"
Last edited: