pilotian
Well Known Member
Yep, I was going along everything was dandy, then the squeezer slipped and caught the spar channel and look what happened to my beautiful vertical stab.
Embarrassing to say the least, and I imagine I will need to rebuild the stab but wanted input first...
Note: I drilled the rivet out, tried flattening the area with no such luck.... If for some reason it was salvage able I wouldn't use a flush head to to my flattening attemp lost the dimple.
Moral of story: Im stupid.
.....
Embarrassing to say the least, and I imagine I will need to rebuild the stab but wanted input first...
Note: I drilled the rivet out, tried flattening the area with no such luck.... If for some reason it was salvage able I wouldn't use a flush head to to my flattening attemp lost the dimple.
Moral of story: Im stupid.
.....