I am doing a condition inspection on a friends RV7, equipped with IO-390 with a "RamAir" induction that incorporates a K&N filter. The filter housing is a cone shaped aluminum cylinder with large, 3" holes, around it's circumference
these holes are covered, between the filter and the aluminum housing, with a plastic material .0030" thick that act as a check valve when the ram air is closed.
Problem, the plastic is cracked and part has broken off and I need to find a replacement. Unfortunately, I do not know the mfg. of the filter housing.
Any suggestions would be helpful.
Dick
these holes are covered, between the filter and the aluminum housing, with a plastic material .0030" thick that act as a check valve when the ram air is closed.
Problem, the plastic is cracked and part has broken off and I need to find a replacement. Unfortunately, I do not know the mfg. of the filter housing.
Any suggestions would be helpful.
Dick