claycookiemonster
Well Known Member
One of the many wonderful things about the newer glass instruments is how SO MUCH information can be compressed into a smaller space than the old "Six-pack" days of round dials. ![D10 with GNC 355 and Garmin_Dynon Com.png D10 with GNC 355 and Garmin_Dynon Com.png](https://vansairforce.net/data/attachments/14/14713-ca40504313c5a0b46cac99006db4c4b7.jpg)
My tentative panel will leave room along the bottom of the panel unused, so I'm interested in cutting the panel along the bottom to allow for a longer stick and more leg room.
I'm concerned that cutting off that rounded corner at the bottom will reduce the integrity of the panel. Am I over thinking that? I know I could always rivet some angle along the newer edge down there.
![D10 with GNC 355 and Garmin_Dynon Com.png D10 with GNC 355 and Garmin_Dynon Com.png](https://vansairforce.net/data/attachments/14/14713-ca40504313c5a0b46cac99006db4c4b7.jpg)
My tentative panel will leave room along the bottom of the panel unused, so I'm interested in cutting the panel along the bottom to allow for a longer stick and more leg room.
I'm concerned that cutting off that rounded corner at the bottom will reduce the integrity of the panel. Am I over thinking that? I know I could always rivet some angle along the newer edge down there.