I finally got started on my RV-7 QB Wings today.
A notice was in the packing stating that the bolts that hold the fuel tanks to the "Z" brackets may or may not be the correct AN3-4 bolts.
I did a spot check by removing about half of the easy ones to get to and the ones I removed were correct and tight. The screws on the outside periphery were obviously incorrect and need replacing.
Has any one had the incorrect bolts holding the tanks on their spars?
Ken Korenek
Arlington, Texas
N702KK
QB Wings on the workbench!
A notice was in the packing stating that the bolts that hold the fuel tanks to the "Z" brackets may or may not be the correct AN3-4 bolts.
I did a spot check by removing about half of the easy ones to get to and the ones I removed were correct and tight. The screws on the outside periphery were obviously incorrect and need replacing.
Has any one had the incorrect bolts holding the tanks on their spars?
Ken Korenek
Arlington, Texas
N702KK
QB Wings on the workbench!