[lostpilot28]

I'm away from home base this weekend and had my cowl off to remove the oil-cooler shutter (temps were a bit high with it installed), so I thought about looking at the P-mag LED when I powered them on...just to see. I'm not sure what I thought I'd find, but I did it anyway.

With Master power on, I turned each one on seperately (not in Maintenance mode) and I got a green flash followed by a yellow flash. I looked on the emagair.com website and couldn't find what that meant, so I figured I'd ask you guys if you know what it means. They seem to run fine, but the "yellow" indication makes me wonder.

Anyone know?

 

[cguarino]

once or multiple

Did it flash yellow one time or did it continue to flash yellow?

 

[lostpilot28]

Did it flash yellow one time or did it continue to flash yellow?

It only flashed yellow one time, after it flashed green (one time also). Then it went dark.

 

[cguarino]

Good news.

It only flashed yellow one time, after it flashed green (one time also). Then it went dark.

Normal ops if the P-lead was ungrounded (switch in run position).

 

[elippse]

SOS

If it flashes three short flashes followed by three longer flashes and keeps repeating, run!