niteav8r
I'm New Here
Hi all-
Just a simple build question, I hope- working on an F1 Rocket rudder...
I've got a bottom rib with holes that seem to be pretty close to the edge. I drilled through the pre-drilled holes in the bottom rudder spar reinforcement plate into the rudder spar, rudder horn and bottom rib.
Looks like the bottom rib flange has 6/32"ED - 5/32"ED, when it should be more like 8/32" minimum.
Can I just put two more holes inboard, through the rib, spar, horn and doubler plate? How far inboard should I put them if so?
Hope that (newbie) question made sense...
Thanks.
-Barry
Just a simple build question, I hope- working on an F1 Rocket rudder...
I've got a bottom rib with holes that seem to be pretty close to the edge. I drilled through the pre-drilled holes in the bottom rudder spar reinforcement plate into the rudder spar, rudder horn and bottom rib.
![niteav8r](/community/proxy.php?image=http%3A%2F%2Fs71.photobucket.com%2Falbums%2Fi157%2Fniteav8r%2F%3Faction%3Dview%26current%3DBtm_rudder_rib1-1.jpg&hash=78be9bd9827bda3a080797dcf42a856d)
Looks like the bottom rib flange has 6/32"ED - 5/32"ED, when it should be more like 8/32" minimum.
Can I just put two more holes inboard, through the rib, spar, horn and doubler plate? How far inboard should I put them if so?
Hope that (newbie) question made sense...
Thanks.
-Barry