On page 23-06 step 5 its says to dimple the nut plate holes(inthe triangle cut out) on the left and right skins (flush the inboard side) that would mean the nut plate goes on the outside of the skin. When I look at it I wonder how one gets the screws into those nut plates (from the inside)as that area will be closed up. Looks like the wing electrical contact plate goes there .but there is nothing in the fuse plans that shows that(must come with the finish kit)
Anybody deal with this yet. Do we really mount the nut plates on the outside of the skin. ???
I have never had to call Vans support but maybe I will tommorow .( I would now but its Sunday Vans not open)
Oh ya those longerons are a challenge to form .but I ended up with a good fit.
Thanks
Brad Stiefvater
Salem South Dakota
Anybody deal with this yet. Do we really mount the nut plates on the outside of the skin. ???
I have never had to call Vans support but maybe I will tommorow .( I would now but its Sunday Vans not open)
Oh ya those longerons are a challenge to form .but I ended up with a good fit.
Thanks
Brad Stiefvater
Salem South Dakota