IowaRV9Dreamer
Well Known Member
Hi - I'm working on the fuse kit and need to make some roughly 2'-3' angle pieces for the F-728/729 bellcrank rib assembly. They are supposed to be made from 0.063 angle (3/4 x 3/4).
The problem is the fuse kit came with a single 6' piece, which I've pretty much used up making other bulkheads.
The wing kit came with (2) 12' pieces. These aren't the main longerons but are just listed as "angle" on the wing kit packing list.
Are there any really long 0.063 3/4x3/4 pieces needed in the fuselage? I've been looking but can't find any. I don't know if I should cut both pieces from one of the 12' pieces, or one from each....
Thanks for any info, maybe I worry too much,
dave
The problem is the fuse kit came with a single 6' piece, which I've pretty much used up making other bulkheads.
The wing kit came with (2) 12' pieces. These aren't the main longerons but are just listed as "angle" on the wing kit packing list.
Are there any really long 0.063 3/4x3/4 pieces needed in the fuselage? I've been looking but can't find any. I don't know if I should cut both pieces from one of the 12' pieces, or one from each....
Thanks for any info, maybe I worry too much,
dave