Mike Coady
Well Known Member
I am installing the gear mounts in my RV7A QB. Once in place, the holes don,t all line up perfect. I made sure to get the carry through bolt holes lined up but the two 1/4 bolt holes on one of the arms would not line up no matter what I did. I presume this is a slight error in the QB or the welded gear mount may have pulled in the jigging welding process. I oversized the two holes on the mount, not the carry through, for these two bolts by about 3/64. I believe this will solve the problem and it fits very tightly still. Any comments on the retrofit??