[woxofswa]

I have decided to add an adjustable oil cooler vent. Does anyone know of an existence or source for a side mount base for the push pull control?
Thanks

 

[Carl Froehlich]

I have decided to add an adjustable oil cooler vent. Does anyone know of an existence or source for a side mount base for the push pull control?
Thanks

I have five push/pull controls on the lower panel apron:
- Aft cabin heat
- Fwd cabin heat
- Engine Alternate air
- Oil cooler air (butterfly valve)
- Parking brake

If you have no room on the lower apron you could make a bracket out of 3/4"x1" 0.063 aluminium and attach the angle to the bottom of the apron. If not the apron you can mount the angle on the left side wire conduit cover.

Carl

 

[woxofswa]

I appreciate what you're saying l, but it doesn't really work with my configuration.

I was really hoping to put the control in the footwell either on the side of the tunnel or the outer sidewall. I thought I've seen a proper mount for side application, but can't find them now.