transientair
Active Member
I know that this topic has been addressed before, but I'll be the first to admit that when it comes to wiring, I start scratching my head near immediately. So the searches I've done (Google and VAF) have offered some diagrams, but nothing I've been able to successfully figure out.
I have a push button start and two toggle switches (NKK S-6AL) and I'd like to wire them in such a way that with both switches up, the right mag (non-impulse coupling) grounds. I'll have two conventional mags.
From what I understand, this should be possible with the switches I have.
But as soon as I look at all of the connections on the back of these switches, my brains turn to water.
Does anybody have a kindergarten-level explanation or drawing that would help?
Thanks all
I have a push button start and two toggle switches (NKK S-6AL) and I'd like to wire them in such a way that with both switches up, the right mag (non-impulse coupling) grounds. I'll have two conventional mags.
From what I understand, this should be possible with the switches I have.
But as soon as I look at all of the connections on the back of these switches, my brains turn to water.
Does anybody have a kindergarten-level explanation or drawing that would help?
Thanks all
Last edited: