CharlieWaffles
Well Known Member
Prop Mounting Orientation Verification
I am trying to verify the installation of my propeller. The Hartzell documentation shows two examples - R flange and F flange. Trying to correlate that to the prop itself and the flywheel there are some differences. On my flywheel there are two NON-protruding sockets - leading me to believe this is a R flange. But on my prop there is only 1 hole that is not countersunk.
So other the obvious alignment of having the non-countersunk hole line up with one of the non-protruding sockets, is there any other orientation to take into account? Does it matter which non-protruding socket to use?
I am trying to verify the installation of my propeller. The Hartzell documentation shows two examples - R flange and F flange. Trying to correlate that to the prop itself and the flywheel there are some differences. On my flywheel there are two NON-protruding sockets - leading me to believe this is a R flange. But on my prop there is only 1 hole that is not countersunk.
So other the obvious alignment of having the non-countersunk hole line up with one of the non-protruding sockets, is there any other orientation to take into account? Does it matter which non-protruding socket to use?
![WP_20121129_007.jpg](/community/proxy.php?image=http%3A%2F%2Fi1079.photobucket.com%2Falbums%2Fw513%2Fcheapguy69%2FWP_20121129_007.jpg&hash=64b5db8187b354741b36d7ce7cd8abb6)
![WP_20121129_008.jpg](/community/proxy.php?image=http%3A%2F%2Fi1079.photobucket.com%2Falbums%2Fw513%2Fcheapguy69%2FWP_20121129_008.jpg&hash=97fe3662b75580751c6f80807446fbdd)
Last edited: