[egp8111]

Vans catalog seems to indicate that the 4 in. prop extension is available in either 3/8 in. for the o-320 or 1/2 for the o-360 prop bolt size. My prop requires 7/16 bolts. Am I missing something here? Can the lugs be changed or the extension be drilled to accept 7/16 bolts.
Thanks
Skip

 

[AX-O]

Skip,
Buy the prop extension from the link below. Sam is great with customer service and knows what he is talking about. That is the same thing I needed.

http://www.sabermfg.com/

 

[lr172]

I also recommend going direct to Sam at Sabre. He will make what ever you need. If I remember correctly, the 3/8" and 7/16" bushings have the same OD and can be replaced. No sense doing this on a new purchase when you can get exactly what you need.

Larry

 

[GalinHdz]

+2 on the recommendation to call Sam at Sabre. He can even custom make an extension if needed, but I doubt this is your situation.

 

[egp8111]

sounds easy enough
thanks all
Skip