southtarnation
Well Known Member
I have two loose prop lugs on my extension. I spoke to Sam Saber and he ran through a procedure I didn't really grasp. Before I call him back I was hoping to learn from the knowledge base here.
He suggested "steaking" the lugs and ??? Using a drive pin to spread the top 50% and then a 3/8ths all thread (since I have 7/16 prop bolts) with a nut and washer on the back and a socket on the front to draw it back into the extension whilst using wd40 liberally.
Hopefully someone can help me clear up my notes so I can call him back and have an idea what he his telling me to do.
He suggested "steaking" the lugs and ??? Using a drive pin to spread the top 50% and then a 3/8ths all thread (since I have 7/16 prop bolts) with a nut and washer on the back and a socket on the front to draw it back into the extension whilst using wd40 liberally.
Hopefully someone can help me clear up my notes so I can call him back and have an idea what he his telling me to do.