J

Jesse23

Well Known Member
Has anyone used Polygone to remove tank sealer? Mine has gummed up pretty bad on the inboard lower rib and is now the fuel seeping is enough for tank removal. The outside bead is compromised and gummy, so I’m sure that inside bead needs to be completely removed and resealed with drilling a big hole on the back with the ever so popular Vans tank repair kit.

PolyGone 310-AG Gel - RPM Technology

PolyGone™ 310-AG Gel High-Performance Polysulfide Depolymerizer / Stripping Agent – Made In The USA DESCRIPTION: PolyGone 310-AG is a high performance Aviation Grade polysulfide sealant depolymerizer / emulsifier designed to remove cured polysulfide and other sealants from a variety of surfaces...
rpm-technology.com
 

Attachments

  • IMG_5519.jpeg
    IMG_5519.jpeg
    1.6 MB · Views: 4
Jesse23 said:
Has anyone used Polygone to remove tank sealer? Mine has gummed up pretty bad on the inboard lower rib and is now the fuel seeping is enough for tank removal. The outside bead is compromised and gummy, so I’m sure that inside bead needs to be completely removed and resealed with drilling a big hole on the back with the ever so popular Vans tank repair kit.

PolyGone 310-AG Gel - RPM Technology

PolyGone™ 310-AG Gel High-Performance Polysulfide Depolymerizer / Stripping Agent – Made In The USA DESCRIPTION: PolyGone 310-AG is a high performance Aviation Grade polysulfide sealant depolymerizer / emulsifier designed to remove cured polysulfide and other sealants from a variety of surfaces...
rpm-technology.com
Click to expand...
It works very well if a heavy enough coating of the polygon is applied and allowed to sit as described in the instructions. it sometimes takes a second application to get it 100%.
 
You must log in or register to reply here.